DELL EMC D-PE-OE-23 Übungsprüfungen
Zuletzt aktualisiert am 08.05.2025- Prüfungscode: D-PE-OE-23
- Prüfungsname: Dell Technologies PowerEdge Operate 2023
- Zertifizierungsanbieter: DELL EMC
- Zuletzt aktualisiert am: 08.05.2025
What happens when the Hardware Root of Trust fails to validate the BIOS?
- A . Boot Guard switches over to the backup BIOS and logs a warning in the system event log.
- B . Automated BIOS Recovery process recovers the BIOS from the DUP saved in the control panel.
- C . The server continues running and logs a critical error in the system event log.
- D . The server shuts down and logs a critical error in the system event log.
What happens when the Hardware Root of Trust fails to validate the BIOS?
- A . Boot Guard switches over to the backup BIOS and logs a warning in the system event log.
- B . Automated BIOS Recovery process recovers the BIOS from the DUP saved in the control panel.
- C . The server continues running and logs a critical error in the system event log.
- D . The server shuts down and logs a critical error in the system event log.
A technician needs to add a device to SupportAssist Enterprise. Policy requires that no additional software be installed on the server OS.
In addition to Username and Password, what information is required to add the device?
- A . IP address or hostname for the server OS
- B . IP address for Dell TechDirect
- C . IP address fir OpenManage Server Administrator
- D . IP address or hostname for the iDRAC
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?
- A . System Profile
- B . Virtualization Technology
- C . HyperThreading
- D . Number of Cores per Processor
Where is the LCD panel located on a Dell PowerEdge 16G server?
- A . An add-on Server Bezel
- B . Rear of the server
- C . Left control panel
- D . Right control panel
A technician plugs in a server that has dual power supply units. After powering on the system, they notice that the power supply status indicators blink green then turn off.
What troubleshooting steps should the technician take to resolve this issue?
- A . Set the power supply redundancy option to ‘No Redundancy’
- B . Check that the PSUs are not connected to a 240VAC source
- C . Update the iDRAC firmware to enable control of new PSU features
- D . Check that the PSUs are the same efficiency, feature set, health status, and supported voltage
A company has an environment with multiple AD forests in a one-way trust relationship. The AD provider on the cluster is configured with SFU.
The trusted domains are failing to supply UIDs and GIDs to the Dell EMC Isilon cluster. As a result, users from the trusted domain are receiving an “access denied” error message.
What is a possible reason for the denial?
- A . Non-transitive forest trust is required for cross domain lookups.
- B . Transitive external two-way trust is required for cross domain lookups.
- C . Non-transitive external two-way trust is required for cross domain lookups.
- D . Transitive forest trust is required for cross domain lookups.
A technician needs to remotely update the iDRAC with Lifecycle Controller firmware.
Which three steps should the technician take to complete the update? (Choose three.)
- A . After firmware update completes, restart server
- B . Connect to the iDRAC GUI
- C . Go to the Firmware Update page and upload the iDRAC firmware.
- D . Go to Summary Page and reset the iDRAC
- E . Boot the server into F10 to start the firmware update
- F . Locate the latest iDRAC firmware and download to management station
Which operation should a technician perform to ensure configuration recovery if a server must be physically replaced?
- A . View and export the current hardware inventory
- B . Create and export a Server Configuration Profile
- C . Back up and export the Server Profile to a network share
- D . Back up the Server Profile to vFlash
A server administrator needs to configure iDRAC to send email alerts. When the administrator runs a test, the error “Sending the test mail failed” is returned.
The administrator enables platform event filter alerts and configures the following settings:
IP: 172.168.1.10/24
Gateway: 172.16.1.1
DNS: 172.168.1.100
SMTP: 172.168.1.5
Destination email address (enabled): administrator@example com
The administrator has NOT made any other changes to iDRAC.
What should the administrator do to correct the issue?
- A . Update iDRAC to the latest revision
- B . Verify iDRAC SMTP settings match SMTP server
- C . Change the SMTP server to its FQDN
- D . SMTP authentication must be configured