DELL EMC D-PE-OE-23 Übungsprüfungen
Zuletzt aktualisiert am 07.05.2025- Prüfungscode: D-PE-OE-23
- Prüfungsname: Dell Technologies PowerEdge Operate 2023
- Zertifizierungsanbieter: DELL EMC
- Zuletzt aktualisiert am: 07.05.2025
A Dell EMC PowerEdge server logs the following CPU Machine Check error: CPU1 IERR.
What action might be required to solve the alert?
- A . Clear logs
- B . Update the Intel driver
- C . Swap the PERC controller
- D . Reseat the IDSDM
What is required to use the iSM Automatic System Recovery feature?
- A . Server Administrator not installed
- B . OS watchdog timer disabled
- C . OS watchdog timer enabled
- D . Server Administrator installed
What is required to use the iSM Automatic System Recovery feature?
- A . Server Administrator not installed
- B . OS watchdog timer disabled
- C . OS watchdog timer enabled
- D . Server Administrator installed
A technician installs a PCIe Host Bus Adapter in a server, powers on the server, then starts the Lifecycle Controller to update the adapter’s firmware. Before starting the firmware update, they examine the Current Hardware Inventory. The Host Bus Adapter is not visible so it cannot be selected for a firmware update.
How should the technician address this issue?
- A . Power down the server, reseat the adapter, and reboot the server
- B . Perform a server profile backup and reboot the server
- C . Disable Collect Service Inventory on Restart and reboot the server
- D . Enable Collect System Inventory on Restart and reboot the server
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.
What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A . The Virtual Console is disabled
- B . Operating system not installed on remote server
- C . The server has been powered down
- D . There are more than the maximum number of active sessions
Refer to the exhibit.
A technician is testing basic SMTP alerts on an iDRAC for a server. The test SMTP alerts fail with the message shown. The technician can ping the hostname of the SMTP server from their workstation.
Which two actions should the technician take to fix the issue? (Choose two.)
- A . Verify SMTP port settings on the iDRAC
- B . Use the IP address of the SMTP server
- C . Enable the SMTP Client service on the iDRAC
- D . Add iDRAC hostname to the SMTP server hosts file
A technician receives a new server with five drives.
They need to configure the drives based on the following requirements received from the administrator:
– Drive 0 as a single disk with no RAID
– Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5
The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.
How should the technician configure the drives?
- A . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- B . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
- C . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- D . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
A technician receives a new server with five drives.
They need to configure the drives based on the following requirements received from the administrator:
– Drive 0 as a single disk with no RAID
– Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5
The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.
How should the technician configure the drives?
- A . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- B . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
- C . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- D . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
The operating system on a Dell PowerEdge R760xa fails to boot.
What iDRAC feature under the iDRAC UI Troubleshooting tab can be used to diagnose the issue?
- A . System Event Logs
- B . POST code state
- C . SupportAssist collection
- D . Post package repair
An administrator is troubleshooting a no power issue on his PowerEdge server. They have confirmed the cable is "known good," and the LED on the PSU is green.
What is the next step in troubleshooting this issue?
- A . Disable the PSU hot spare.
- B . Ensure the power supply is RAF.
- C . Reseat the power supply.
- D . Replace the power supply.